tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 1 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com applications ? wlan ? cellular infrastructure ? test and measurement ? smart energy ? uhf/vhf ? lmr ? general purpose broadband wireless 16-pin 4x4mm qfn package orderin g information part no. description tqp4m0010 spdt absorptive switch tqp4m0010-pcb 100-4500 mhz evaluation board standard t/r size = 2500 pieces on a 13? reel functional block diagram product features ? general purpose ? low insertion loss ? +56 dbm input ip3 ? high isolation ? absorptive ? single positive voltage control ? standard smt package ? 100 to 6000 mhz operating range pin configuration pin no. symbol 1 v dd 2 v ctrl 3 rfc 4 ? 8, 13 ? 16 gnd or nc 10, 11 gnd 9 rf1 12 rf2 backside paddle rf/dc gnd general description the tqp4m0010 is a gaas fet single-pole, double throw (spdt) high isolation absorptive switch that provides 100-6000 mhz broadband performance. the tqp4m0010 may be operated using a dc supply ranging from 3 to 5 volts and with control signals operating from 1.8 to 5 volts. the tqp4m0010 is packaged in a rohs-compliant, compact 4x4 mm surface-mount leadless package. this spdt switch is targeted for use in wireless infrastructure, test and measurement, or can be used fo r any general purpose wireless application.
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 2 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com electrical specifications test conditions unless otherwise noted: v dd = +5 v, v ctrl = +3 v, temp.=+25c, 50 system parameter conditions min typ max units operational frequency range 100 6000 mhz control voltage low 0 0.4 v high 1.8 v dd +0.5 v v insertion loss 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 0.5 0.6 0.7 0.8 0.8 0.9 1.0 db isolation ? rfc to rf1/rf2 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 50 45 45 55 48 47 44 db isolation ? rf1 to rf2 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 50 44 43 40 db return loss ? rfc port 0.1 ? 1.0 ghz 1.0 ? 4.5 ghz 16 20 13 db input p1db f = 2 ghz +33 dbm input ip3 f = 2 ghz, pin/tone=+15 dbm, f=1 mhz +56 dbm switching speed t on (50% ctl to 90% rf) 233 290 ns t on (50% ctl to 90% rf), ? 40 to +85c 1 us t off (50% ctl to 10% rf) 96 ns t on (50% ctl to 98% rf) 300 t off (50% ctl to 2% rf) 110 total supply current (i dd ) 70 150 ua absolute maximum ratings parameter rating storage temperature ? 65 to +150c rf input power , cw, 50 , t = 25c +36 dbm supply voltage (v dd ) +6 v control voltage (v ctrl ) v dd +0.5 v operation of this device out side the parameter ranges given above may cause permanent damage. recommended operating conditions parameter min typ max units v dd 2.75 5.0 5.25 v operating temp. range ? 40 +95 c electrical specifications ar e measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions. switch control truth table signal path state v ctrl rfc to rf1 rfc to rf2 low off (isolation) on (insertion loss) high on (insertion loss) off (isolation) digital control voltages state bias condition low 0.4 v high 1.8 v
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 3 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com tqp4m0010-pcb evaluation board triquint pcb 1084809 material and stack-up 50 ohm line dimensions: width = .021? spacing = .006 ? bill of material ? tqp4m0010-pcb reference ? des. ? value ? description ? manuf. ? part ? number ? n/a n/a printed circuit board triquint 1084809 rev. 2 u1 n/a spdt switch triquint tqp4m0010 r1 (1) 0 ohm res., 0402, 5%, 1/16w various c1, c2, c3, c6, c7 100 pf cap., 0402, 5%, 50v, npo/cog various c4 1000 pf cap., 0402, 5%, 50v, npo/cog various c5 dnp do not populate j4, j5, j6 n/a solder turret mill max 2533-0-00-44-00-00-07-0 j1, j2, j3, j7, j8 n/a conn, rf, sma f strt, .062 pcb radiall inc. 9602-1111-018 notes: 1. r1 may be omitted (replaced with circuit trace) in end user circuits.
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 4 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com typical performance ? tqp4m0010-pcb test conditions unless otherwise noted: v dd = +5 v, v ctrl = +3 v, temp=25c, 50 system parameter typical value units frequency 1 2 3 ghz insertion loss (1) 0.5 0.6 0.7 db rfc port return loss 20 16 13 db rfc to rf1/rf2 isolation 55 50 47 db rf1 to rf2 isolation 50 45 43 db input p1db +36 +33 +30 dbm input ip3 (2) +53 +56 +56 dbm notes: 1. the insertion loss values reflect de-embedding of eval b oard rf i/o line losses that would not be present in target applications. 2. iip3 measured with two tones at an input powe r of +15 dbm / tone separated by 1 mhz. performance plots ? tqp4m0010-pcb test conditions unless otherwise noted: v dd =+5 v, v ctrl = +3 v, temp=+25c, 50 system -3 -2.5 -2 -1.5 -1 -0.5 0 0123456 insertion loss (db) frequency (ghz) insertion loss vs. frequency +85c +25c ? 40c -25 -20 -15 -10 -5 0 0123456 |s11| (db) frequency (ghz) rfc port return loss +85c +25c ? 40c -70 -65 -60 -55 -50 -45 -40 -35 0123456 isolation (db) frequency (ghz) rfc to rf1/rf2 isolation +85c +25c ? 40c -70 -65 -60 -55 -50 -45 -40 -35 0123456 isolation (db) frequency (db) rf1 to rf2 isolation +85c +25c ? 40c 40 45 50 55 60 65 00.511.522.533.5 ip3 (dbm) frequency (ghz) input ip3 +85c +25c ? 40c pin=+15 dbm/tone
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 5 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com switching speed over temperature (t on ) ? tqp4m0010-pcb temp.=-40c switching speed(t on )=225 ns. (50% ctl to 90% rf) temp.=+25c switching speed(t on )=233 ns. (50% ctl to 90% rf) temp.=+85c switching speed(t on )=245 ns. (50% ctl to 90% rf)
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 6 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com switching speed over temperature (t off ) ? tqp4m0010-pcb temp.=-40c switching speed(t off )=110 ns. (50% ctl to 10% rf) temp.=+25c switching speed(t off )=96 ns. (50% ctl to 10% rf) temp.=+85c switching speed(t off )=88 ns. (50% ctl to 10% rf)
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 7 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com pin configuration and description pin no. label description 1 v dd dc voltage supply 2 v ctrl digital control voltage 3 rfc antenna input. dc blocking capacitor required. 4 ? 8, 13 ? 16 gnd or nc no electrical connection. provide grounded land pads for pcb mounting integrity. 10, 11 gnd rf/dc ground 9 rf1 rf output 1. dc blocking capacitor required. 12 rf2 rf output 2. dc blocking capacitor required. backside paddle rf/dc gnd rf/dc ground. use recommended via pattern and ensure good solder attach for best thermal and electrical performance. switching speed using different blocking caps switching speed measurement b ased on tqs application board using shutdown circuit: v ctrl =3.0v, v dd =5.0v with c1, c2, c3 = 100pf -40c +25c +85c turn-off transition (50% cntr ? 10% rf) 110 ns 96 ns 88 ns turn-on transition (50% cntr ? 90% rf) 225 ns 233 ns 245 ns with c1, c2, c3 = 10pf -40c +25c +85c turn-off transition (50% cntr ? 10% rf) 85 ns 77 ns 69 ns turn-on transition (50% cntr ? 90% rf) 2.71 us 2.55 us 2.10 us
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 8 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com mechanical information package marking and dimensions marking: part number ? 4m0010 year, week - yyww assembly code - xxxxx notes: 1. all dimensions are in millim eters. angles are in degrees. 2. except where noted, this pa rt outline conforms to jedec standard mo-220, i ssue e (variation vggc) for thermally enhanced plastic very thin fine pitch quad flat no lead package (qfn). 3. dimension and tolerance formats conform to asme y14.4m-1994. 4. the terminal #1 identifier and terminal numbering conform to jesd 95-1 spp-012 5. contact plating: nipdau pcb mounting pattern ? 16x 0.80 0.65 pitch 2.30 2.30 0.27 16x 0.40 component side 12x package outline 0.55 0.64 1 1 r.19 3 notes: 1. all dimensions are in millimeters. angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. 3. we recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10?). 4. ensure good package backside paddle solder attach for reliable operation and best electrical performance. gnd/thermal pad .10 c .08 c seating plane 16x 2.500.05 exp. dap 16x 0.400.05 2.500.05 exp. dap .8500.050 c 16x 0.300.05 16x 0.65 pitch pin #1 identifier chamfer 0.300 x 45 terminal #1 identifier 0.000 0.050 .203 ref. 1.95 ref. 4.0000.050 4.0000.050 4m0010 yyww xxxxx
tqp4m0010 high isolation absorptive spdt switch datasheet: rev h 03-28-14 - 9 of 9 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: class 0 (rf ports) value: <250 v esd rating: class 1a (dc lines) value: 250 volts to < 500 volts test: human body model (hbm) standard: jedec standard jesd22-a114 esd rating: class iv value: >1000 v test: charged device model (cdm) standard: jedec standard jesd22-c101 solderability compatible with both lead-free (260c max. reflow temperature) and tin/lead (245c max. reflow temperature) soldering processes. package contact plating: nipdau rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on t he use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating msl rating: level 1 test: 260c convection reflow standard: jedec standard ipc/jedec j-std-020 important notice for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.503.615.9000 email: info-sales@triquint.com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@triquint.com contact information the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or li ability whatsoever for any of the information contained herein. triquint assume s no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is " and with all faults, and the entire risk associated with such information is entirely with the user. a ll information contained herein is subject to change without notice. customers should obtain and verify the latest relevant info rmation before placing orders fo r triquint products. the information contained herein or any use of such information does not grant, exp licitly or implicitly, to any party any patent rights, licenses, or any other inte llectual property rights, whether with r egard to such information itself o r anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or life- sustaining applications, or other applications where a fa ilure would reasonably be expected to cause severe personal injury or death.
|
